Showing 1–12 of 16 results

A11 Hot Melt Stick

A11 is a translucent, high viscosity and slow setting general purpose glue stick.

Properties

Designed for use on the paper, cloth and plastic related applications. Ideal for bonding wood, metal, fabric, ceramics, masonry, leather, cardboard. Appropriate when immediate bonding is required. Environmentally friendly. High green strength. Non-sticky surfaces. Odourless. Easy to use.

Applications

Ideal for household repairs, DIY tasks, craft and hobby works.

A30 Acrylic Nail Free Adhesive

A30 is a water-based adhesive used for bonding numerous building materials. It is particularly suitable for DIY users due to solvent-free content and high bonding strength.

Properties

Acrylic dispersion based. Good gap-filling capacity on rough surfaces. Suitable for both indoor and outdoor applications. Weatherproof. Over paintable. Low odour. Solvent-free

Applications

Bonding materials such as wood, non-polished stones, concrete, plaster, tiles, panels, synthetic building materials etc. Mounting wooden construction elements, wood and plaster panels, plaster ornaments. Mounting decorative wooden trimmings. Repairing cracks in plaster. Quick repairs on walls and plaster. Suitable surfaces:MDF, Particleboard, Wood, Polystyrene foam, Concrete, Masonry, Tile, Ceramic, Stone, Plasterboard.

A32 Express Polyurethane Adhesive

A32 is a single component, fast curing polyurethane based adhesive. It combines high bond strength with fast curing. The water resistance property makes it exceptionally good at bonding wooden surfaces where water splash and moisture is an issue.

Properties

Fast curing, low press time. Conforms to D4 according to DIN EN 204. Transparent. Extremely high bond strength on wooden substrates. Thixotropic, non-sag, ideal for vertical joints. Low consumption, economical. Usable on slightly wet substrates. Very good resistance to chemicals. Excellent resistance to moisture and weather conditions.Non-shrinking. Low odor.

Applications

It is suitable for use in construction and repair applications where a permanent strong bond is required between porous-porous and porousnonporous surfaces. Bonding wooden surfaces at bathroom, kitchens, decks etc. where there is a constant moisture and water contact risk. It can be used for bonding various kinds of construction materials such as wood, MDF, concrete, metal, polystyrene and polyurethane foam, marble, granite and ceramic etc.

A36 Super Mitre-Bond Kit

A36 an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.

Properties

High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.

Applications

It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required. Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates. Especially suitable for the applications where cure speed needs to be accelerated. Although DEMSUN A36 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.

A37 UPVC Mitre Bond

A37 an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.

Properties

High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.

Applications

It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required. Suitable for UPVC, MDF, wood, chip wood, rubber, most plastics, leather and other common substrates. Especially suitable for the applications where cure speed needs to be accelerated. Although DEMSUN A37 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.

A42 Super Glue

A42 is an extra low viscosity superfast instant glue based on cyanoacrylate adhesive. It is excellent where extremely fast cure is required and/or where penetration is required.

Properties

Immediate bond. Very high bond strength after a few seconds.

Applications

Suitable for glass, rubber, metals, ceramic and many plastics.

A43 Super Glue

A43 is an extra low viscosity superfast instant glue based on cyanoacrylate adhesive. It is excellent where extremely fast cure is required and / or where penetration is required.

Properties

Immediate bond. Very high bond strength after a few seconds.

Applications

Suitable for glass, rubber, metals, ceramic and many plastics.

A58 Cement Pvc Adhesive

A58 adhesive containing stabilized Tetrahydrofurane is suitable for joints, resistant to shear strain of pressure pipes (e. g. drinking water and gas pipes) with uPVC fittings, and gluing cable conduits, drain pipes etc in accordance with the recommendations of the Plastic Pipe Association.

Properties

High pressure resistance (16 bars). Water Resistant. Chemical Resistant especially to inorganic acids. Fast curing, maximum leak protection. Excellent gap-filling proprieties. Easy bonding even on large surfaces. Hot and cold water pipes (60°C). Resistant to bacteria. The products conforms to following standards; DIN 16970, BS 4346, ASTM-D 2564, NEN 7106

Applications

Specifically indicated for: Bonding cement uPVC pipes and accessories in pressure systems up to 16 PN. Bonding pipes and accessories in waste systems according to the following: PVC-U plastics piping systems for soil and waste discharge (low and high temperature). ABS plastics piping systems for soil and waste discharge (low and high temperature). PVC-C plastics piping systems for soil and waste discharge (low and high temperature)

A60 PVA Wood Adhesive

Demsun A60 is a ready to use water resistant wood adhesive based on polyvinyl acetate homopolymer emulsion. It is specially formulated to conform to EN 204 (D3).

Properties

Conforms to D3 according to DIN EN 204. Excellent bond strength on hard, and soft woods. Water based. Easy application.

Applications

Suitable for gluing all types of wood, wooden materials and flat laminates. Wood to wood, soft- and hardboard, synthetic resin board and chipboard. Suitable for fixing paper, cardboard, paper or textile-backed PVC cloth to wood and board. May also be used to bond outdoor timber constructions such as window-frames and external doors. Particularly suitable for moisture-resistant bonds which have to fulfil high demands.

A62 PU Wood Adhesive

A62 is a one-component polyurethane based adhesive that cures with moisture in the air and in the surface applied.

Properties

Easy application, low viscosity. High bond strength. Water resistant (D4-DIN EN204). Can be used on slightly humid surfaces. Resistant to temperature extremes. Resistant to moisture and chemicals.

Applications

Fixing and gluing wooden elements to other various porous and non-porous elements as wood, metal, concrete, polystyrene foam etc. Furniture and boat production. Fixing of raised flooring laying in combination with mechanical fixtures. All bonding applications that need a high water resistance.

C90 Polyester Chemical Anchor

Demsun C90 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications.

Properties

Suitable for solid and hollow structures. High solid content. Easy to extrude and to inject. Thixotropic, can be applied in vertical and horizontal direction. Fast curing.

Applications

Low to Medium-load applications in solid and hollow supports. Fixing of; Gates, Balustrades, Roller blinds, Panes, Antennas, Consoles, Cable trays etc

C95 Polyester Chemical Anchor

Demsun C95 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications.

Properties

Suitable for solid and hollow structures. High solid content. Easy to extrude and to inject. Thixotropic, can be applied in vertical and horizontal direction. Fast curing.

Applications

Low to Medium-load applications in solid and hollow supports. Fixing of; Gates, Balustrades, Roller blinds, Panes, Antennas, Consoles, Cable trays etc