Showing 1–9 of 10 results

P33 Fire Rated Professional PU Gun Foam

DEMSUN P33 is a single component, moisture curing, self-expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. PU foam used with an applicator gun and features higher yield, easier application and reusability.

Properties

According to EN 1366-4 fire retardant up to 235 min. – see table enclosed. Efficient seal against smoke and gas. Does not contain CFC’s and H-CFC’s. Excellent adhesion & filling capacity. Excellent mounting capacity and stability. High yield up to 55 liters depending on temperature and humidity. Excellent adhesion on most substrates (except Teflon, PE and PP). High filling capacity. High thermal & acoustical insulation value. After cured, it can be painted, cut, trimmed. No shrinkage. Mould and water resistant. Conforms to fire class B1 (DIN 4102). Conforms to French A+ Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.

Applications

All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.

P34 Fire Rated PU Foam

B1 FIRE RATED PU FOAM, is a single component, moisture curing, self-expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.

Properties

According to EN 1366-4 fire retardant up to 235 min – see table enclosed. Efficient seal against smoke and gas. Does not contain CFC’s and H-CFC’s. Excellent adhesion & filling capacity.  Excellent mounting capacity and stability. High yield up to 45 liters depending on temperature and humidity. Excellent adhesion on most substrates (except Teflon, PE and PP).  High filling capacity. High thermal & acoustical insulation value. After cured, it can be painted, cut, trimmed. No shrinkage. Mould and water resistant. Conforms to fire class B1 (DIN 4102). Conforms to French A+.  Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.

Applications

All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.

P43 Fire Rated PU Foam

B1 FIRE RATED PU FOAM, is a single component, moisture curing, self-expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.

Properties

According to EN 1366-4 fire retardant up to 235 min – see table enclosed. Efficient seal against smoke and gas. Does not contain CFC’s and H-CFC’s. Excellent adhesion & filling capacity.  Excellent mounting capacity and stability. High yield up to 45 liters depending on temperature and humidity. Excellent adhesion on most substrates (except Teflon, PE and PP).  High filling capacity. High thermal & acoustical insulation value. After cured, it can be painted, cut, trimmed. No shrinkage. Mould and water resistant. Conforms to fire class B1 (DIN 4102). Conforms to French A+.  Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.

Applications

All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.

P44 Fire Rated Pu Foam

Demsun P44, is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.

Properties

All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.

Applications

Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.

P55 Multi Purpose PU Foam

P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.

Properties

Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

P66 Professional Multi Purpose Pu Gun Foam

Multi-purpose Polyurethane Foam Professional is a single - component pu foam

Properties

Excellent adhesion& filling capacity and high thermal&acoustical insulation value. Economical consumption thanks to precise application. High yield up 45 litres and expansion up to 1,5 times depending on temperature and humidity. Conforms to fire class B3 according to DIN 4102–1. Mould-proof, water-proof and overpaintable.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

P77 Mega Professional PU Gun Foam

Mega Professional Pu Foam is a single-component professional pu foam which yields significantly higher volumes. It is used with a special applicator gun.

Properties

High yield up 65 litres, depending on the humidity and temperature. Excellent adhesion on common construction materials. Economical consumption thanks to precise application.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes.

P88 Max Multi Purpose PU Foam

DEMSUN MAX is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door&window frames. It yields minimum %100 more foam than straw foams, cures faster and forms easy to cut flexible foam.

Properties

Maximum Yield: Provides %100 more yield than that of standard straw foams. Low-Expansion: Ensures not to bend or bow door and window frames. Decreases foam waste. Fast Cure: Becomes tack free in 5 minutes and cut able within 45 minutes. Cures Flexible: Easier to cut if the gap is overfilled Reusable: Highest technology valves system provides none sticking and reusability. Improved Adhesion&Stability: Better non-sagging performance on vertical surfaces. Usable in 4 Seasons: Special formulation allows application at low temperatures (-5 °C) Polyurethane based: Perfect adhesion on common building materials. Closed-Cell Structure: Provides effective heat&sound insulation. It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Fixing&sealing of door and window frames. Sealing applications where low-expansion is needed. Filling small cavities

P90 Thermal Insulation Foam

P90 PU Foam for top quality heat and sound insulation at buildings and houses. Provides a unique, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards, glass wool and rock wool. Single-component product used with an applicator gun. It does not contain any propellant gases which are harmful to the ozone layer.

Properties

Excellent adhesion to all kind of building materials.  Can be applied easily to uneven, hard to reach surfaces where it is not possible to use traditional insulation materials.  Excellent thermal insulation value (0.025 W/(m.K). Elimination of thermal bridges. Elimination of the dew point.  Yield up to 3m² with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed. No need to use mechanical fastening elements after use. Over paintable

Applications

Roofs, attics, facades, foundations, basements, floors, interior walls, interfloor overlappings, interior partitions, ceilings and cellars. Structural elements of buildings, balcony, loggia, doors, window slopes, pipes, canals and tank kind round surfaces, uneven and rough all surfaces. Car body and car trailers, boats, yachts, vessels and all kind of sea vehicles.