Showing 1–9 of 15 results

D20 Super Sanitary Silicone

D20 is a specially formulated for use in production and installation of shower cabins which has no solvent and shows excellent mold resistant properties. It’s a superior sealant for sealing and glazing applications featuring excellent adhesion and durability.

Properties

Conforms to ISO EN 11600-F-20LM. %100 silicone, does not contain any solvent. Cures very fast. Mold-Proof. Stays bright and clean. Outstanding resistance to mildew and fungus. Resistant to temperature extremes and aging. Does not crack or discolor. Withstands detergents, cleaning agents and chemicals. Acetoxy curing system. Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.

Applications

Glazing and bonding in shower cabinets during production. Filling joints between tiles, tub and shower cabin during installation. Filling joints between bath tubs and tiles after production. Waterproofing sinks.

H32 High Temperature Silicone Sealant

H32 is a high-performance silicone sealant developed for sealing, bonding and repairing works where heat resistance is required. It is an ideal sealant for high temperature construction applications. It reacts with atmospheric moisture to produce a tough, elastic silicone.

Properties

Excellent heat resistance after curing up to 250 °C permanently and up to 300 °C temporarily. 100% silicone, Remains flexible at low (-40 °C) and high (+250 °C) temperatures, Resists to mechanical enforcement after curing, Acetoxy cure, RTV silicone, Will not crack, shrink or become brittle, One component.

Applications

Sealing and bonding applications in automotives, On heating systems and ovens for sealing / tightness, Sealing and bonding in stoves, Gaskets in pumps and motors, Sealing chimneys, Other bonding and sealing applications where parts must perform at high temperatures.

M12 Fire Saver Intumescent Acrylic Sealant

M12 is water-borne intumescent acrylic sealant. At the temperatures above120°C, it reduces the heat transfer by expanding its volume. Also gives extra time with the cooling effect of the released water steam at this temperature.

Properties

Single-component sealant based on plasto elastic acrylic capable of swelling. Expands in volume at temperatures exceeding 120°C and reduce heat transfer. Saves time by releasing water vapor to fire, Easy to apply. Waterproof layer after drying forms a layer. Weather resistant and remains flexible for a long time. Ideal for sealing low movement joints, suitable for up to 50 mm gaps. Paintable and fill the surface of the fat-free and does not affect the surface.

Applications

Walls and floors’ expansion joints. Panel joints for insulation purposes and similar materials Wood, steel and PVC joinery for isolation. Decorative joints. Steel channels, canal boats, for the sealing of cables and cable ducts. For indoor applications that require fire resistance. In order to fill in areas where fire resistance applications. All joints in buildings that require fire resistance. Fire resistance up to 15% of the desired elasticity of joints shows.

M18 Siliconized Flexy Acrylic Sealant

M18 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.

Properties

Its siliconized structure, makes it possible to handle movement up to 15%. Water based & Non-toxic..Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.

Applications

Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.

M19 Acrylic Sealant

M18 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.

Properties

Its siliconized structure, makes it possible to handle movement up to 15%. Water based & Non-toxic..Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.

Applications

Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.

M35 PU Sealant Constrution

M35 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.

Properties

Possesses permanent elasticity No sagging – Thixotropic No surface tackiness after full cure.. Do not pick up dirt No shrinkage Enhanced storage stability Can be applied with hand gun and tooled easily Paintable Cures bubble-free 25 % movement capability Conforms to BS 6920 for the metallic water soluble impurities and is suitable for use in drinking water system

Applications

Expansion joints between many different construction materials Movement and connection joints in floors Indoor and outdoor applications for pedestrian and traffic areas Joints between prefabricated construction materials Sealing and bonding of ventilation ducts, gutters and spouts etc. For expansion joints between pre-cast concrete panels Meets the requirements of ISO 11600 F 25 LM

M45 Constrution & Automotive PU Sealant

M45 is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, glass, wood and various plastic materials.

Properties

Permanently flexible Non-sag consistency - Exceptional thixotropy Non-sticky / does not pick up dirt No change in volume - No shrinkage Improved storage stability Easy to gun, can be easily smoothed Over-paintable Meets the requirements of ISO 11600 F 25 HM

Applications

Body construction of cars, containers, caravans etc. Sealing and bonding of ventilation ducts, gutters and spouts etc. Sealing of sheet metal seams For vibration reduction in all type of sheet metal assembly works Sealing against water, air, gas and dust.

M55 PU Windshield Adhesive

M55 Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

Properties

One component formulation Good non-sag properties Short cut-off string Cold application Fast curing – Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted.

Applications

It is especially useful in bonding windshield glass into automotive frames. Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

N25 Mirror Silicone

N25 High performance neutral cure silicone which is particularly designed for bonding the mirrors in all kinds and sizes without harming the mirror. A bonded mirror is safer because there is no risk of large pieces of glass falling in the event of breakage.

Properties

Highly elastic, +/-25% movement capability. Excellent primerless adhesion to numerous porous and non-porous substrates,Safer mirror construction with non-corrosive properties. Permanently elastic. Fast curing. %100 Silicone, Solvent free, very low odor. Adjustable, easy to apply. High viscosity non slump formula. One component moisture-cured. Excellent tooling properties. Resistant to temperature extremes (-60 °C to +180 °C)

Applications

Mirror walls in shops, restaurants, gymnasiums. Bonding mirrors to sound plaster,concrete, wood etc. Bonding mirrors to doors or ceramic wall tiles.