FX44 Enhanced Flexibility Polyurea
Back to products
HP44 Abrasion Resistant Polyurea

44A Aliphatic Polyurea

100% solids, flexible, two component, UV light stable elastomer coating material. It is a superior coating material designed specifically for industrial and commercial applications receiving
constant or intermittent exposure to ultraviolet light. It can be applied directly to most substrates and may be used as a topcoat for existing epoxy, polyurethane, or polyurea. When fully cured, produce a highly abrasion resistant, high-gloss, smooth finish. The material is applied high pressure and temperature spray machine.

Properties

UV light and 100% colour stable. Exterior surface coatings. High gloss finish. %100 solids, VOC and solvent free. Corrosion resistant. Seamless and waterproofing. Excellent adhesion force
Moisture and temperature insensitive. Impact and abrasion resistant. Excellent tensile and structural resistance. Can be applied any desired thickness.

Applications

Any exterior application requires colour stability. Roofs and garages. Airports and shipyards. Wind Turbines. Bridges and tunnels. Waterparks and recreation parks. Decorative applications.

Categories: ,
Description

Technical Properties

  • Chemical structure : A: MDI Prepolymer B: Amine Resin
  • VOC content (%) ASTM D1259 : 0
  • Solid content (%) ASTM D2697 : 100
  • Gel time (sec) : 15 - 30
  • Tack free time (sec) : 45 - 60
  • Recoat time (hr) : 0-12 (without pretreatment)
  • Density (gr/cm³) ASTM D792 : 1,05-1,08
  • Tensile strength (MPa) ASTM D638 : ≥ 16
  • Elongation at break (%) ASTM D638 : ≥400
  • Hardness (Shore D) ASTM D2240 : 40 - 45
  • Abrasion resistance (mg) EN ISO 5470-1 : <33 (H22, 1000 cycle)
  • Pull off strength (N/mm²) ASTM D 4541 : Concrete: ≥2,5 Steel: ≥6

Related products

N28 Lead Silicone Sealant

,
N28 is a one component, high quality Neutral curing 100% silicone sealant designed for applications where long term durable plumbing, spouting, roofing, flashing, cladding and guttering are required. It is suitable for sealing of connection.

Properties

Outstanding adhesion without primer on joining elements made from brick, stone, concrete, wooden, plastic, steel, aliminum, zinc, porcelain, ceramic, PVC, metal, glass and porous surfaces, Highly elastic, +/-25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Easy to apply. Chemically resistant. Non-sag.

Applications

Joints and cracks in gutters. Flashing. Downpipes. Lap joints. Skylights. Cladding walls

M55 PU Windshield Adhesive

,
M55 Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

Properties

One component formulation Good non-sag properties Short cut-off string Cold application Fast curing – Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted.

Applications

It is especially useful in bonding windshield glass into automotive frames. Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

P77 Mega Professional PU Gun Foam

,
Mega Professional Pu Foam is a single-component professional pu foam which yields significantly higher volumes. It is used with a special applicator gun.

Properties

High yield up 65 litres, depending on the humidity and temperature. Excellent adhesion on common construction materials. Economical consumption thanks to precise application.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes.

H32 High Temperature Silicone Sealant

,
H32 is a high-performance silicone sealant developed for sealing, bonding and repairing works where heat resistance is required. It is an ideal sealant for high temperature construction applications. It reacts with atmospheric moisture to produce a tough, elastic silicone.

Properties

Excellent heat resistance after curing up to 250 °C permanently and up to 300 °C temporarily. 100% silicone, Remains flexible at low (-40 °C) and high (+250 °C) temperatures, Resists to mechanical enforcement after curing, Acetoxy cure, RTV silicone, Will not crack, shrink or become brittle, One component.

Applications

Sealing and bonding applications in automotives, On heating systems and ovens for sealing / tightness, Sealing and bonding in stoves, Gaskets in pumps and motors, Sealing chimneys, Other bonding and sealing applications where parts must perform at high temperatures.

C80 Foam Cleaner

,
C80 removes fresh PU foam and cleans the PU foam gun adapter after the application. Cleans surfaces, clothes, window&door frames and prevents the foam cure in the gun adapter.

Properties

Powerful solvent based aerosol cleaner for removing uncured PU foam ( straw and gun adapter foam).Designed especially for cleaning the gun adapter of foam. Cleaner has a spray activator for removing the foam from the gun adapter. It can be used in all positions. Propellant gas is not harmful to the ozone layer.

Applications

Cleaning of the gun adapter. Cleaning of the valves of the PU Foam Aerosol. Removal of uncured foam.

Glossy Red

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

P88 Max Multi Purpose PU Foam

,
DEMSUN MAX is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door&window frames. It yields minimum %100 more foam than straw foams, cures faster and forms easy to cut flexible foam.

Properties

Maximum Yield: Provides %100 more yield than that of standard straw foams. Low-Expansion: Ensures not to bend or bow door and window frames. Decreases foam waste. Fast Cure: Becomes tack free in 5 minutes and cut able within 45 minutes. Cures Flexible: Easier to cut if the gap is overfilled Reusable: Highest technology valves system provides none sticking and reusability. Improved Adhesion&Stability: Better non-sagging performance on vertical surfaces. Usable in 4 Seasons: Special formulation allows application at low temperatures (-5 °C) Polyurethane based: Perfect adhesion on common building materials. Closed-Cell Structure: Provides effective heat&sound insulation. It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Fixing&sealing of door and window frames. Sealing applications where low-expansion is needed. Filling small cavities

P44 Fire Rated Pu Foam

,
Demsun P44, is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.

Properties

All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.

Applications

Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.