44 Standard Pure Polyurea
Back to products
FR44 Fire Retardant Polyurea

45 Eco Pure Polyurea

This pure polyurea system is a very fast set, 2-component, 100% solid, flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. Due to its
superior physical and mechanical properties provides extremely durable coating. Since it does not contain any VOC or solvent, it is enviromentally friendly product. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.

Properties

Fast reactivity and fast return to service time. Seamless and joint-less coating. %100 solid, VOC free, no solvents. No catalyst. Little or no odor. Excellent thermal stability. Excellent water resistant. Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc.Excellent flexibility. Non sensitivity to temperature and humidity. Excellent chemical resistance.
Excellent impact and abrasion resistance. Anticorrosive. Very good tensile and structural strength. Variable application thickness possible.

Applications

General waterproofing and anticorrosion applications– tanks, pools, swimming pools, ponds, pipes, pipelines, waste water treatments, manholes and sewer linings, roof, balcony and terrace
coatings. Floors– industrial floors, hospitals, factories. Construction– roads , bridge decks, airports, line striping. Marine industry– ship’s underwater part and ship’s decks protection and
ship docks.Leisure industry– water parks, aquariums linings, playgrounds and decorative applications. On thermal insulation products for waterproofing (polyurethane foam, EPS, XPS etc.)

Categories: ,
Description

Technical Properties

  • Chemical structure : A: MDI Prepolymer B: Amine Resin
  • VOC content (%) ASTM D1259 : 0
  • Solid content (%) ASTM D2697 : 100
  • Gel time (sec) : 5 - 10
  • Tack free time (sec) : 15 - 30
  • Recoat time (hr) : 0-12 (without pretreatment)
  • Post cure time (hr) : 24
  • Density (gr/cm³) ASTM D792 : 0,99-1,03
  • Tensile strength (MPa) ASTM D638 : ≥ 15
  • Modulus (MPa) ASTM D638 : %100 elongation ≥10 %300 elongation ≥12
  • Elongation at break (%) ASTM D638 : ≥375
  • Hardness (Shore D) ASTM D2240 : 35-40
  • Hardness (Shore A) ASTM D2240 : 90-95
  • Tear strength (N/mm) ASTM D 624 : ≥40
  • Taber abrasion (mg) EN ISO 5470-1 : <100 (H22/1000 cycle)
  • Impact resistance EN ISO 6272-1 : Class III
  • Thermal Resistance : -30 °C-100°C
  • Pull off strength (N/mm²) ASTM D 4541 : Concrete: ≥2,5 Steel: ≥6

Related products

Glossy Yellow

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

P77 Mega Professional PU Gun Foam

,
Mega Professional Pu Foam is a single-component professional pu foam which yields significantly higher volumes. It is used with a special applicator gun.

Properties

High yield up 65 litres, depending on the humidity and temperature. Excellent adhesion on common construction materials. Economical consumption thanks to precise application.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes.

N28 Lead Silicone Sealant

,
N28 is a one component, high quality Neutral curing 100% silicone sealant designed for applications where long term durable plumbing, spouting, roofing, flashing, cladding and guttering are required. It is suitable for sealing of connection.

Properties

Outstanding adhesion without primer on joining elements made from brick, stone, concrete, wooden, plastic, steel, aliminum, zinc, porcelain, ceramic, PVC, metal, glass and porous surfaces, Highly elastic, +/-25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Easy to apply. Chemically resistant. Non-sag.

Applications

Joints and cracks in gutters. Flashing. Downpipes. Lap joints. Skylights. Cladding walls

Glossy Red

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

Glossy Black – Matte Black

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

P55 Multi Purpose PU Foam

,
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.

Properties

Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

M12 Fire Saver Intumescent Acrylic Sealant

,
M12 is water-borne intumescent acrylic sealant. At the temperatures above120°C, it reduces the heat transfer by expanding its volume. Also gives extra time with the cooling effect of the released water steam at this temperature.

Properties

Single-component sealant based on plasto elastic acrylic capable of swelling. Expands in volume at temperatures exceeding 120°C and reduce heat transfer. Saves time by releasing water vapor to fire, Easy to apply. Waterproof layer after drying forms a layer. Weather resistant and remains flexible for a long time. Ideal for sealing low movement joints, suitable for up to 50 mm gaps. Paintable and fill the surface of the fat-free and does not affect the surface.

Applications

Walls and floors’ expansion joints. Panel joints for insulation purposes and similar materials Wood, steel and PVC joinery for isolation. Decorative joints. Steel channels, canal boats, for the sealing of cables and cable ducts. For indoor applications that require fire resistance. In order to fill in areas where fire resistance applications. All joints in buildings that require fire resistance. Fire resistance up to 15% of the desired elasticity of joints shows.

P66 Professional Multi Purpose Pu Gun Foam

,
Multi-purpose Polyurethane Foam Professional is a single - component pu foam

Properties

Excellent adhesion& filling capacity and high thermal&acoustical insulation value. Economical consumption thanks to precise application. High yield up 45 litres and expansion up to 1,5 times depending on temperature and humidity. Conforms to fire class B3 according to DIN 4102–1. Mould-proof, water-proof and overpaintable.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes