• English
    • Russia
  • Newsletter
  • Contact Us
Select category
  • Select category
  • Adhesive
  • Aerosols & Spray Paints
  • All Products
  • Coatings
  • Pu Foams
  • Sealants
Menu
  • Home
  • About us
  • Products
  • Quality
  • Media
  • Contact us
Home All Products A32 Express Polyurethane Adhesive
MS High Tack Polymer Sealant Adhesive
Back to products
A30 Acrylic Nail Free Adhesive

A32 Express Polyurethane Adhesive

A32 is a single component, fast curing polyurethane based adhesive. It combines high bond strength with fast curing. The water resistance property makes it exceptionally good at bonding wooden surfaces where water splash and moisture is an issue.

Properties

Fast curing, low press time. Conforms to D4 according to DIN EN 204. Transparent. Extremely high bond strength on wooden substrates. Thixotropic, non-sag, ideal for vertical joints. Low consumption, economical. Usable on slightly wet substrates. Very good resistance to chemicals. Excellent resistance to moisture and weather conditions.Non-shrinking. Low odor.

Applications

It is suitable for use in construction and repair applications where a permanent strong bond is required between porous-porous and porousnonporous surfaces. Bonding wooden surfaces at bathroom, kitchens, decks etc. where there is a constant moisture and water contact risk. It can be used for bonding various kinds of construction materials such as wood, MDF, concrete, metal, polystyrene and polyurethane foam, marble, granite and ceramic etc.

Categories: Adhesive, All Products
Share:
  • Description
Description

Technical Properties

  • Basis : MS Polymer
  • Density : 1.49 ± 0.03 gr/ml
  • Tack-Free Time : 15-20 min (23°Cand %50 R.H.)
  • Consistency : Paste, White, Black and Grey
  • Shrinkage : Approx. 3,5 mm/24 hr (23°Cand %50 R.H.)
  • Pressing Time : 0 mm
  • Temperature Resistance : +5 °C to +35 °C
  • Application Temperature : +5°C and +40°C

Maximum Shear Strength (beech-beech)

  • After 15 min : > 50 kgf/cm²
  • After 24 hours : > 80 kgf/cm²

* The results were obtained by providing optimum environmental conditions.

Folders

  • pdf-file-format-symbol TDS
  • pdf-file-format-symbol MSDS
CodeVolumeColorBox 
DS04103310 mlTransparent  24

Related products

S22 Universal Silicone Sealant

All Products, Sealants
S22 is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It provides a strong adhesion and suitable for use on common non-porous building materials.

Properties

Stays permenantly elastic after curing. Remains flexible in low and high temperatures. Resistant to temperature exteremes. Resistance to aging, cracking and discoloring.

Applications

Sealing around windows and doors. Sealing in DIY applications. On bathroom, kitchen and plumbing applications. Connection and expansion joints on glass, porcelain, steel etc. Sealing electric, telephone etc. sockets and switches.

N27 Multi Purpose Building Neutral Silicone

All Products, Sealants
N27 is a neutral cure, silicone sealant, exclusively created for weather sealing and glazing application. It forms highly resistive weatherproof seal on windows and building facades.

Properties

Provides permanent elasticity. Not affected by exposure to sunlight, rain, snow and maintains it over many years, Exceptional resistance to temperature extremes, Very low odor and noncorrosive. Excellent flexibility and adhesion to numerous porous and non-porous Substrates for large scale construction and glazing applications. Fast curing, low modulus, high elasticity. High viscosity non slump formula.

Applications

Weather sealing and joint sealing for walls, windows and doors. Sealing and mounting the window and door frames. Sealing applications of marble, stone and other porous substrates.

N25 Mirror Silicone

All Products, Sealants
N25 High performance neutral cure silicone which is particularly designed for bonding the mirrors in all kinds and sizes without harming the mirror. A bonded mirror is safer because there is no risk of large pieces of glass falling in the event of breakage.

Properties

Highly elastic, +/-25% movement capability. Excellent primerless adhesion to numerous porous and non-porous substrates,Safer mirror construction with non-corrosive properties. Permanently elastic. Fast curing. %100 Silicone, Solvent free, very low odor. Adjustable, easy to apply. High viscosity non slump formula. One component moisture-cured. Excellent tooling properties. Resistant to temperature extremes (-60 °C to +180 °C)

Applications

Mirror walls in shops, restaurants, gymnasiums. Bonding mirrors to sound plaster,concrete, wood etc. Bonding mirrors to doors or ceramic wall tiles.

P77 Mega Professional PU Gun Foam

All Products, Pu Foams
Mega Professional Pu Foam is a single-component professional pu foam which yields significantly higher volumes. It is used with a special applicator gun.

Properties

High yield up 65 litres, depending on the humidity and temperature. Excellent adhesion on common construction materials. Economical consumption thanks to precise application.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes.

M12 Fire Saver Intumescent Acrylic Sealant

All Products, Sealants
M12 is water-borne intumescent acrylic sealant. At the temperatures above120°C, it reduces the heat transfer by expanding its volume. Also gives extra time with the cooling effect of the released water steam at this temperature.

Properties

Single-component sealant based on plasto elastic acrylic capable of swelling. Expands in volume at temperatures exceeding 120°C and reduce heat transfer. Saves time by releasing water vapor to fire, Easy to apply. Waterproof layer after drying forms a layer. Weather resistant and remains flexible for a long time. Ideal for sealing low movement joints, suitable for up to 50 mm gaps. Paintable and fill the surface of the fat-free and does not affect the surface.

Applications

Walls and floors’ expansion joints. Panel joints for insulation purposes and similar materials Wood, steel and PVC joinery for isolation. Decorative joints. Steel channels, canal boats, for the sealing of cables and cable ducts. For indoor applications that require fire resistance. In order to fill in areas where fire resistance applications. All joints in buildings that require fire resistance. Fire resistance up to 15% of the desired elasticity of joints shows.

M55 PU Windshield Adhesive

All Products, Sealants
M55 Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

Properties

One component formulation Good non-sag properties Short cut-off string Cold application Fast curing – Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted.

Applications

It is especially useful in bonding windshield glass into automotive frames. Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

P88 Max Multi Purpose PU Foam

All Products, Pu Foams
DEMSUN MAX is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door&window frames. It yields minimum %100 more foam than straw foams, cures faster and forms easy to cut flexible foam.

Properties

Maximum Yield: Provides %100 more yield than that of standard straw foams. Low-Expansion: Ensures not to bend or bow door and window frames. Decreases foam waste. Fast Cure: Becomes tack free in 5 minutes and cut able within 45 minutes. Cures Flexible: Easier to cut if the gap is overfilled Reusable: Highest technology valves system provides none sticking and reusability. Improved Adhesion&Stability: Better non-sagging performance on vertical surfaces. Usable in 4 Seasons: Special formulation allows application at low temperatures (-5 °C) Polyurethane based: Perfect adhesion on common building materials. Closed-Cell Structure: Provides effective heat&sound insulation. It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Fixing&sealing of door and window frames. Sealing applications where low-expansion is needed. Filling small cavities

C80 Foam Cleaner

All Products, Aerosols & Spray Paints
C80 removes fresh PU foam and cleans the PU foam gun adapter after the application. Cleans surfaces, clothes, window&door frames and prevents the foam cure in the gun adapter.

Properties

Powerful solvent based aerosol cleaner for removing uncured PU foam ( straw and gun adapter foam).Designed especially for cleaning the gun adapter of foam. Cleaner has a spray activator for removing the foam from the gun adapter. It can be used in all positions. Propellant gas is not harmful to the ozone layer.

Applications

Cleaning of the gun adapter. Cleaning of the valves of the PU Foam Aerosol. Removal of uncured foam.
certificates2
Certificates Of Our High Quality
  • Quick Links
    • About Us
    • Products
    • Quality Policy
    • Contact Us
    • B2B
  • Our Product Groups​
    • Pu Foams
    • Sealants
    • Adhesive
    • Aerosols & Spray Paints
    • Coatings
  • USEFUL LINKS
    • Privacy Policy
    • Returns
    • Terms & Conditions
    • Latest News

Our Social Links:

DEMSUN Company 2021 CREATED BY DEMSUN. Sample Text
  • Menu
  • Categories
  • Adhesive
  • Aerosols & Spray Paints
  • Coatings
  • Fashion
  • Sealants
  • Pu Foams
  • Home
  • About us
  • Products
  • Quality
  • Contact us
  • B2B