A37 UPVC Mitre Bond
A37 an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
Properties
High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
Applications
It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required. Suitable for UPVC, MDF, wood, chip wood, rubber, most plastics, leather and other common substrates. Especially suitable for the applications where cure speed needs to be accelerated. Although DEMSUN A37 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.
Description
Related products
P33 Fire Rated Professional PU Gun Foam
DEMSUN P33 is a single component, moisture curing, self-expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. PU foam used with an applicator gun and features higher yield, easier application and reusability.
Properties
According to EN 1366-4 fire retardant up to 235 min. – see table enclosed. Efficient seal against smoke and gas. Does not contain CFC’s and H-CFC’s. Excellent adhesion & filling capacity. Excellent mounting capacity and stability. High yield up to 55 liters depending on temperature and humidity. Excellent adhesion on most substrates (except Teflon, PE and PP). High filling capacity. High thermal & acoustical insulation value. After cured, it can be painted, cut, trimmed. No shrinkage. Mould and water resistant. Conforms to fire class B1 (DIN 4102). Conforms to French A+ Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.Applications
All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.
P55 Multi Purpose PU Foam
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Properties
Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.Applications
Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes
D20 Super Sanitary Silicone
D20 is a specially formulated for use in production and installation of shower cabins which has no solvent and shows excellent mold resistant properties. It’s a superior sealant for sealing and glazing applications featuring excellent adhesion and durability.
Properties
Conforms to ISO EN 11600-F-20LM. %100 silicone, does not contain any solvent. Cures very fast. Mold-Proof. Stays bright and clean. Outstanding resistance to mildew and fungus. Resistant to temperature extremes and aging. Does not crack or discolor. Withstands detergents, cleaning agents and chemicals. Acetoxy curing system. Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.Applications
Glazing and bonding in shower cabinets during production. Filling joints between tiles, tub and shower cabin during installation. Filling joints between bath tubs and tiles after production. Waterproofing sinks.
Glossy White – Matte White
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.
Properties
High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).Applications
Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.
Q21 Aquarium Silicone Sealant
Q21 is a non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It’s a high-quality acetic curing system based silicone sealant featuring excellent adhesion to glass and many other non-porous surfaces.
Properties
100% solventless silicone. Non-toxic to fish. Resistant to water. UV and many chemicals One component cures with atmospheric moisture. Keeps its elasticity at low and high tempratures. Rapid curing. Very good bond and physical strenght.Applications
Construction and repair of aquariums and many glass structures. Suitable on glass/aluminum structures. Glazing on aluminum frames and shop displays. Sealing of windows and doors.
N28 Lead Silicone Sealant
N28 is a one component, high quality Neutral curing 100% silicone sealant designed for applications where long term durable plumbing, spouting, roofing, flashing, cladding and guttering are required. It is suitable for sealing of connection.
Properties
Outstanding adhesion without primer on joining elements made from brick, stone, concrete, wooden, plastic, steel, aliminum, zinc, porcelain, ceramic, PVC, metal, glass and porous surfaces, Highly elastic, +/-25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Easy to apply. Chemically resistant. Non-sag.Applications
Joints and cracks in gutters. Flashing. Downpipes. Lap joints. Skylights. Cladding walls
P96 Polyurethane Adhesive Foam
P96 is a one component aerosol polyurethane adhesive foam, fast moisture curing. Provides a very fast, powerful adhesive for various construction materials, especially highly recommended for heat insulation systems.
Properties
Powerful adhesion of polystyrene heat panels (XPS and EPS). Instant adhesion and wall plugging within two hours. More economical. Ready to use in aerosol can. Minimum 6 m2 heat insulation panel adhesion for each can. Minimum expansion during drying period. After dried, no further expansion and shrinkage. A lighter material compared to plaster, alternative material, used in heat insulation systems. No more extra burden or weight to building. High yield up to 55 liters, depending on the humidity and temperature. Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102 Part-1 ) Usable at low temperature like 0 °C It does not contain any propellant gases which are harmful to the ozone layer.Applications
Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.
Glossy Red
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.