AS44 Antistatic Polyurea
Back to products
44A Aliphatic Polyurea

FX44 Enhanced Flexibility Polyurea

Excellent flexibility and elongation. Fast reactivity and fast return to service time. Seamless coating. 100% solid, VOC free, no solvents. Environmentally friendly. Very good tensile and structural strength. Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc. Excellent flexibility. Excellent crack bridging properties. Temperature and moisture
insensitive. UV, chlorine and saltwater resistant. Variable application thickness is possible. Broad color spectrum.

Properties

Excellent flexibility and elongation. Fast reactivity and fast return to service time. Seamless coating. 100% solid, VOC free, no solvents. Environmentally friendly. Very good tensile and
structural strength. Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc. Excellent flexibility. Excellent crack bridging properties. Temperature and moisture
insensitive. UV, chlorine and saltwater resistant. Variable application thickness is possible. Broad color spectrum.

Applications

General waterproofing applications where high flexibility necessary as: Pools and storage tanks. Roofs, terraces and garages. Geotextile coating. Decorative applications. Water and amusement parks.

Categories: ,
Description

Technical Properties

  • Chemical structure : A: MDI Prepolymer B: Amine Resin
  • Color : White, black, grey, yellow and any RAL color
  • VOC content (%) ASTM D1259 : 0
  • Solid content (%) ASTM D2697 : 100
  • Gel time (sec) : 20 - 30
  • Tack free time (sec) : 60 - 90
  • Recoat time (hr) : 0-12 (without pretreatment)
  • Post cure time (hr) : 24
  • Density (gr/cm³) ASTM D792 : 0,99-1,03
  • Tensile strength (MPa) ASTM D638 : ≥ 10
  • Modulus (MPa) ASTM D638 : %100 elongation ≥3 - %300 elongation ≥5
  • Elongation at break (%) ASTM D638 : ≥500
  • Hardness (Shore A) ASTM D2240 : 70 - 75
  • Pull off strength (N/mm²) ASTM D 4541 : Concrete: ≥2,5 Steel: ≥6

Related products

Glossy Blue

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

M45 Constrution & Automotive PU Sealant

,
M45 is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, glass, wood and various plastic materials.

Properties

Permanently flexible Non-sag consistency - Exceptional thixotropy Non-sticky / does not pick up dirt No change in volume - No shrinkage Improved storage stability Easy to gun, can be easily smoothed Over-paintable Meets the requirements of ISO 11600 F 25 HM

Applications

Body construction of cars, containers, caravans etc. Sealing and bonding of ventilation ducts, gutters and spouts etc. Sealing of sheet metal seams For vibration reduction in all type of sheet metal assembly works Sealing against water, air, gas and dust.

Glossy Yellow

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

N25 Mirror Silicone

,
N25 High performance neutral cure silicone which is particularly designed for bonding the mirrors in all kinds and sizes without harming the mirror. A bonded mirror is safer because there is no risk of large pieces of glass falling in the event of breakage.

Properties

Highly elastic, +/-25% movement capability. Excellent primerless adhesion to numerous porous and non-porous substrates,Safer mirror construction with non-corrosive properties. Permanently elastic. Fast curing. %100 Silicone, Solvent free, very low odor. Adjustable, easy to apply. High viscosity non slump formula. One component moisture-cured. Excellent tooling properties. Resistant to temperature extremes (-60 °C to +180 °C)

Applications

Mirror walls in shops, restaurants, gymnasiums. Bonding mirrors to sound plaster,concrete, wood etc. Bonding mirrors to doors or ceramic wall tiles.

N28 Lead Silicone Sealant

,
N28 is a one component, high quality Neutral curing 100% silicone sealant designed for applications where long term durable plumbing, spouting, roofing, flashing, cladding and guttering are required. It is suitable for sealing of connection.

Properties

Outstanding adhesion without primer on joining elements made from brick, stone, concrete, wooden, plastic, steel, aliminum, zinc, porcelain, ceramic, PVC, metal, glass and porous surfaces, Highly elastic, +/-25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Easy to apply. Chemically resistant. Non-sag.

Applications

Joints and cracks in gutters. Flashing. Downpipes. Lap joints. Skylights. Cladding walls

P66 Professional Multi Purpose Pu Gun Foam

,
Multi-purpose Polyurethane Foam Professional is a single - component pu foam

Properties

Excellent adhesion& filling capacity and high thermal&acoustical insulation value. Economical consumption thanks to precise application. High yield up 45 litres and expansion up to 1,5 times depending on temperature and humidity. Conforms to fire class B3 according to DIN 4102–1. Mould-proof, water-proof and overpaintable.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

M55 PU Windshield Adhesive

,
M55 Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

Properties

One component formulation Good non-sag properties Short cut-off string Cold application Fast curing – Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted.

Applications

It is especially useful in bonding windshield glass into automotive frames. Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

P96 Polyurethane Adhesive Foam

,
P96 is a one component aerosol polyurethane adhesive foam, fast moisture curing. Provides a very fast, powerful adhesive for various construction materials, especially highly recommended for heat insulation systems.

Properties

Powerful adhesion of polystyrene heat panels (XPS and EPS). Instant adhesion and wall plugging within two hours. More economical. Ready to use in aerosol can. Minimum 6 m2 heat insulation panel adhesion for each can. Minimum expansion during drying period. After dried, no further expansion and shrinkage. A lighter material compared to plaster, alternative material, used in heat insulation systems. No more extra burden or weight to building. High yield up to 55 liters, depending on the humidity and temperature. Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102 Part-1 ) Usable at low temperature like 0 °C It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.