M55 PU Windshield Adhesive
Back to products
M35 PU Sealant Constrution

M45 Constrution & Automotive PU Sealant

M45 is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, glass, wood and various plastic materials.

Properties

Permanently flexible Non-sag consistency – Exceptional thixotropy Non-sticky / does not pick up dirt No change in volume – No shrinkage Improved storage stability Easy to gun, can be easily smoothed Over-paintable Meets the requirements of ISO 11600 F 25 HM

Applications

Body construction of cars, containers, caravans etc. Sealing and bonding of ventilation ducts, gutters and spouts etc. Sealing of sheet metal seams For vibration reduction in all type of sheet metal assembly works Sealing against water, air, gas and dust.

Categories: ,
Description

Technical Properties

Before Curing

  • Basis : Polyurethane
  • Consistency : Thixotropic
  • Curing Mechanism : Moisture Curing
  • Density : 1,20-1,25g/ml
  • Tack free time : 20-35 min. (23°C and 50% R.H)
  • Curing Rate : Min. 2,50 mm/day (23°C and 50% R.H)
  • Sagging : 0 mm (EN ISO 7390)
  • Temperature Resistance : -40°C to +90°C
  • Application Temperature : +5°C to +40°C

After Curing

  • Hardness Shore A : 45-50 After 28 days
  • Paintibility : Yes

* The results were obtained by providing optimum environmental conditions.

Folders

  • pdf-file-format-symbol TDS
  • pdf-file-format-symbol MSDS
CodeVolumeColorBox 
DS03413(Sausage)600 mlGray  12
DS03412(Sausage)600 mlBlack  12
DS03411(Sausage)600 mlWhite  12
DS03403310 mlGray  12
DS03402310 mlBlack  12
DS03401310 mlWhite  12

 

Related products

P96 Polyurethane Adhesive Foam

,
P96 is a one component aerosol polyurethane adhesive foam, fast moisture curing. Provides a very fast, powerful adhesive for various construction materials, especially highly recommended for heat insulation systems.

Properties

Powerful adhesion of polystyrene heat panels (XPS and EPS). Instant adhesion and wall plugging within two hours. More economical. Ready to use in aerosol can. Minimum 6 m2 heat insulation panel adhesion for each can. Minimum expansion during drying period. After dried, no further expansion and shrinkage. A lighter material compared to plaster, alternative material, used in heat insulation systems. No more extra burden or weight to building. High yield up to 55 liters, depending on the humidity and temperature. Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102 Part-1 ) Usable at low temperature like 0 °C It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.

C80 Foam Cleaner

,
C80 removes fresh PU foam and cleans the PU foam gun adapter after the application. Cleans surfaces, clothes, window&door frames and prevents the foam cure in the gun adapter.

Properties

Powerful solvent based aerosol cleaner for removing uncured PU foam ( straw and gun adapter foam).Designed especially for cleaning the gun adapter of foam. Cleaner has a spray activator for removing the foam from the gun adapter. It can be used in all positions. Propellant gas is not harmful to the ozone layer.

Applications

Cleaning of the gun adapter. Cleaning of the valves of the PU Foam Aerosol. Removal of uncured foam.

Glossy White – Matte White

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

P55 Multi Purpose PU Foam

,
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.

Properties

Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

M35 PU Sealant Constrution

,
M35 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.

Properties

Possesses permanent elasticity No sagging – Thixotropic No surface tackiness after full cure.. Do not pick up dirt No shrinkage Enhanced storage stability Can be applied with hand gun and tooled easily Paintable Cures bubble-free 25 % movement capability Conforms to BS 6920 for the metallic water soluble impurities and is suitable for use in drinking water system

Applications

Expansion joints between many different construction materials Movement and connection joints in floors Indoor and outdoor applications for pedestrian and traffic areas Joints between prefabricated construction materials Sealing and bonding of ventilation ducts, gutters and spouts etc. For expansion joints between pre-cast concrete panels Meets the requirements of ISO 11600 F 25 LM

Q21 Aquarium Silicone Sealant

,
Q21 is a non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It’s a high-quality acetic curing system based silicone sealant featuring excellent adhesion to glass and many other non-porous surfaces.

Properties

100% solventless silicone. Non-toxic to fish. Resistant to water. UV and many chemicals One component cures with atmospheric moisture. Keeps its elasticity at low and high tempratures. Rapid curing. Very good bond and physical strenght.

Applications

Construction and repair of aquariums and many glass structures. Suitable on glass/aluminum structures. Glazing on aluminum frames and shop displays. Sealing of windows and doors.

D20 Super Sanitary Silicone

,
D20 is a specially formulated for use in production and installation of shower cabins which has no solvent and shows excellent mold resistant properties. It’s a superior sealant for sealing and glazing applications featuring excellent adhesion and durability.

Properties

Conforms to ISO EN 11600-F-20LM. %100 silicone, does not contain any solvent. Cures very fast. Mold-Proof. Stays bright and clean. Outstanding resistance to mildew and fungus. Resistant to temperature extremes and aging. Does not crack or discolor. Withstands detergents, cleaning agents and chemicals. Acetoxy curing system. Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.

Applications

Glazing and bonding in shower cabinets during production. Filling joints between tiles, tub and shower cabin during installation. Filling joints between bath tubs and tiles after production. Waterproofing sinks.

Glossy Green

,
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.