MS High Tack Polymer Sealant Adhesive
MS High Tack is a MS polymer-based, one component, high quality and professional adhesive with high adhesive strength and initial tack. It is suitable for bonding heavy building materials without the use of clamps and/or fixing tape.
Properties
High initial grab, Does not contain solvent, silicone or isocyanate, Semi-elastic bonding, Very good UV resistance. Excellent elasticity and very good adhesion strength. Over-paintable with water based paints, No bubble formation. No shrinkage. Primer less adhesion on many different substrates (preliminary test recommended)
Applications
Wall cladding elements and ceiling panels. Sound isolation panels (mineral wool, woodwool cement & plastic foams). Thermal isolation panels (PUR, PIR, PS). Casings and frames in building construction. Wooden and plastic laths, ornaments and frames. Doorsteps, window sills, skirting boards and cover plates. Complete construction elements (such as roofing and facade elements) in frame.
Description
Related products
M18 Siliconized Flexy Acrylic Sealant
M18 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.
Properties
Its siliconized structure, makes it possible to handle movement up to 15%. Water based & Non-toxic..Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.Applications
Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.
D20 Super Sanitary Silicone
D20 is a specially formulated for use in production and installation of shower cabins which has no solvent and shows excellent mold resistant properties. It’s a superior sealant for sealing and glazing applications featuring excellent adhesion and durability.
Properties
Conforms to ISO EN 11600-F-20LM. %100 silicone, does not contain any solvent. Cures very fast. Mold-Proof. Stays bright and clean. Outstanding resistance to mildew and fungus. Resistant to temperature extremes and aging. Does not crack or discolor. Withstands detergents, cleaning agents and chemicals. Acetoxy curing system. Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.Applications
Glazing and bonding in shower cabinets during production. Filling joints between tiles, tub and shower cabin during installation. Filling joints between bath tubs and tiles after production. Waterproofing sinks.
Glossy Red
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.
Properties
High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).Applications
Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.
P55 Multi Purpose PU Foam
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Properties
Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.Applications
Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes
M35 PU Sealant Constrution
M35 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
Properties
Possesses permanent elasticity No sagging – Thixotropic No surface tackiness after full cure.. Do not pick up dirt No shrinkage Enhanced storage stability Can be applied with hand gun and tooled easily Paintable Cures bubble-free 25 % movement capability Conforms to BS 6920 for the metallic water soluble impurities and is suitable for use in drinking water systemApplications
Expansion joints between many different construction materials Movement and connection joints in floors Indoor and outdoor applications for pedestrian and traffic areas Joints between prefabricated construction materials Sealing and bonding of ventilation ducts, gutters and spouts etc. For expansion joints between pre-cast concrete panels Meets the requirements of ISO 11600 F 25 LM
P88 Max Multi Purpose PU Foam
DEMSUN MAX is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door&window frames. It yields minimum %100 more foam than straw foams, cures faster and forms easy to cut flexible foam.
Properties
Maximum Yield: Provides %100 more yield than that of standard straw foams. Low-Expansion: Ensures not to bend or bow door and window frames. Decreases foam waste. Fast Cure: Becomes tack free in 5 minutes and cut able within 45 minutes. Cures Flexible: Easier to cut if the gap is overfilled Reusable: Highest technology valves system provides none sticking and reusability. Improved Adhesion&Stability: Better non-sagging performance on vertical surfaces. Usable in 4 Seasons: Special formulation allows application at low temperatures (-5 °C) Polyurethane based: Perfect adhesion on common building materials. Closed-Cell Structure: Provides effective heat&sound insulation. It does not contain any propellant gases which are harmful to the ozone layer.Applications
Fixing&sealing of door and window frames. Sealing applications where low-expansion is needed. Filling small cavities
P44 Fire Rated Pu Foam
Demsun P44, is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.
Properties
All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.Applications
Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.
Glossy Yellow
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.