• English
    • Russia
  • Newsletter
  • Contact Us
Select category
  • Select category
  • Adhesive
  • Aerosols & Spray Paints
  • All Products
  • Coatings
  • Pu Foams
  • Sealants
Menu
  • Home
  • About us
  • Products
  • Quality
  • Media
  • Contact us
Home All Products MS Universal Polymer Sealant Adhesive
MS Clear Polymer Sealant Adhesive
Back to products
MS High Tack Polymer Sealant Adhesive

MS Universal Polymer Sealant Adhesive

MS Universal; is a high quality universal hybrid sealant & adhesive based on MS polymer.

Properties

Highly thixotropic: Suitable for horizontal and vertical joints. Does not contain solvent, silicone or isocyanate. High bond strength on nearly all surfaces. Primer less adhesion on many different substrates. No bubble formation, even in wet and humid conditions. Very good UV resistance. Over-paintable with water based paints. No shrinkage. Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.

Applications

Connection joints in sheet metal fabrication, sealing of air conditioning systems. Elastic bonding in vibrating constructions. Sealing of floor joints and low movement wall joints. Sealing joints in containers, cisterns, silos etc.

Categories: Adhesive, All Products
Share:
  • Description
Description

Technical Properties

  • Chemical Base : MS Polymer
  • Curing System : Moisture
  • Density : 1.40 ± 0.03 gr/ml
  • Appearance/Color : Paste, White, Black and Grey
  • Tack Free : Approx. 50 min (23°Cand %50 R.H.)
  • Curing Rate : Approx. 2,5 mm/ 24 hr (23°C and %50 R.H.)
  • Sagging (ISO 7390) : 0 mm
  • E100 Modulus (ISO 8339) : < 0,4 N/mm²
  • Shore A Hardness(ISO 868) : 45 ±5
  • Elongation at Break % (ISO 37) : ≥ % 120
  • Volume Loss : < -%3 (23°C and %50 R.H.)
  • Tensile Strength (ISO 37) : 1,5 - 2,0 N/mm²
  • Heat Resistance : -40°C and +90°C
  • Application Temperature : +5°C and +40°C

* The results were obtained by providing optimum environmental conditions.

Folders

  • pdf-file-format-symbol TDS
  • pdf-file-format-symbol MSDS
CodeVolumeColorBox 
DS03601290 mlWhite  12
DS03602290 mlGray  12
DS03603290 mlBlack  12
DS03611(Sausage)600 mlWhite  12
DS03612(Sausage)600 mlGray  12
DS03613(Sausage)600 mlBlack  12

Related products

N25 Mirror Silicone

All Products, Sealants
N25 High performance neutral cure silicone which is particularly designed for bonding the mirrors in all kinds and sizes without harming the mirror. A bonded mirror is safer because there is no risk of large pieces of glass falling in the event of breakage.

Properties

Highly elastic, +/-25% movement capability. Excellent primerless adhesion to numerous porous and non-porous substrates,Safer mirror construction with non-corrosive properties. Permanently elastic. Fast curing. %100 Silicone, Solvent free, very low odor. Adjustable, easy to apply. High viscosity non slump formula. One component moisture-cured. Excellent tooling properties. Resistant to temperature extremes (-60 °C to +180 °C)

Applications

Mirror walls in shops, restaurants, gymnasiums. Bonding mirrors to sound plaster,concrete, wood etc. Bonding mirrors to doors or ceramic wall tiles.

M12 Fire Saver Intumescent Acrylic Sealant

All Products, Sealants
M12 is water-borne intumescent acrylic sealant. At the temperatures above120°C, it reduces the heat transfer by expanding its volume. Also gives extra time with the cooling effect of the released water steam at this temperature.

Properties

Single-component sealant based on plasto elastic acrylic capable of swelling. Expands in volume at temperatures exceeding 120°C and reduce heat transfer. Saves time by releasing water vapor to fire, Easy to apply. Waterproof layer after drying forms a layer. Weather resistant and remains flexible for a long time. Ideal for sealing low movement joints, suitable for up to 50 mm gaps. Paintable and fill the surface of the fat-free and does not affect the surface.

Applications

Walls and floors’ expansion joints. Panel joints for insulation purposes and similar materials Wood, steel and PVC joinery for isolation. Decorative joints. Steel channels, canal boats, for the sealing of cables and cable ducts. For indoor applications that require fire resistance. In order to fill in areas where fire resistance applications. All joints in buildings that require fire resistance. Fire resistance up to 15% of the desired elasticity of joints shows.

N28 Lead Silicone Sealant

All Products, Sealants
N28 is a one component, high quality Neutral curing 100% silicone sealant designed for applications where long term durable plumbing, spouting, roofing, flashing, cladding and guttering are required. It is suitable for sealing of connection.

Properties

Outstanding adhesion without primer on joining elements made from brick, stone, concrete, wooden, plastic, steel, aliminum, zinc, porcelain, ceramic, PVC, metal, glass and porous surfaces, Highly elastic, +/-25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Easy to apply. Chemically resistant. Non-sag.

Applications

Joints and cracks in gutters. Flashing. Downpipes. Lap joints. Skylights. Cladding walls

P44 Fire Rated Pu Foam

All Products, Pu Foams
Demsun P44, is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. It is designed for easy dispensing through the straw adapter included with each can.

Properties

All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.

Applications

Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.

DS80 Corrosion Inhibitor

All Products, Aerosols & Spray Paints
DS80 is an Corrosion Inhibitor, Lubricant and Multi Purpose Protector aerosol Spray. It’s special formula, combines many properties such as cleaning, lubricating, loosening rusted part, driving out moisture. It can be used in industrial, home and daily labors.

Properties

Ultimate penetrating ability. Loosens rusted or corroded bolts, nuts, cables and any other fasteners. Greases and loosens door and window hinges, locks, and other fittings. Decreases frictions and stops squeaks of pedals, chairs, windows, faucets and hinges. Does not contain silicone and any dirt trap additives. Drives the moist out of the surface and dries it out, thus provides longtime lubricating effect. Protects metal parts against rust. Provides maintenance by penetrating into surface and protects it against dirt. Dissolves tar, gum, adhesive etc. Permeates into grease and dirt and creates a protective film layer on the surface.

Applications

In all fittings, door and window mechanisms, locks, handles, hinges. For annulling humidity on metallic surfaces of bikes, motorbikes, small motor vehicles, electronic contacts and other home tools such as drills, jigsaws, etc. For loosening and activating rusted and jammed mechanisms. Can be used as protective on surfaces vulnerable to water and rust. For dissolving adhesive materials like tar, gum, adhesive tapes etc. Can be used for cleaning and maintenance of weapons.

P88 Max Multi Purpose PU Foam

All Products, Pu Foams
DEMSUN MAX is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door&window frames. It yields minimum %100 more foam than straw foams, cures faster and forms easy to cut flexible foam.

Properties

Maximum Yield: Provides %100 more yield than that of standard straw foams. Low-Expansion: Ensures not to bend or bow door and window frames. Decreases foam waste. Fast Cure: Becomes tack free in 5 minutes and cut able within 45 minutes. Cures Flexible: Easier to cut if the gap is overfilled Reusable: Highest technology valves system provides none sticking and reusability. Improved Adhesion&Stability: Better non-sagging performance on vertical surfaces. Usable in 4 Seasons: Special formulation allows application at low temperatures (-5 °C) Polyurethane based: Perfect adhesion on common building materials. Closed-Cell Structure: Provides effective heat&sound insulation. It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Fixing&sealing of door and window frames. Sealing applications where low-expansion is needed. Filling small cavities

Q21 Aquarium Silicone Sealant

All Products, Sealants
Q21 is a non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It’s a high-quality acetic curing system based silicone sealant featuring excellent adhesion to glass and many other non-porous surfaces.

Properties

100% solventless silicone. Non-toxic to fish. Resistant to water. UV and many chemicals One component cures with atmospheric moisture. Keeps its elasticity at low and high tempratures. Rapid curing. Very good bond and physical strenght.

Applications

Construction and repair of aquariums and many glass structures. Suitable on glass/aluminum structures. Glazing on aluminum frames and shop displays. Sealing of windows and doors.

P55 Multi Purpose PU Foam

All Products, Pu Foams
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.

Properties

Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes
certificates2
Certificates Of Our High Quality
  • Quick Links
    • About Us
    • Products
    • Quality Policy
    • Contact Us
    • B2B
  • Our Product Groups​
    • Pu Foams
    • Sealants
    • Adhesive
    • Aerosols & Spray Paints
    • Coatings
  • USEFUL LINKS
    • Privacy Policy
    • Returns
    • Terms & Conditions
    • Latest News

Our Social Links:

DEMSUN Company 2021 CREATED BY DEMSUN. Sample Text
  • Menu
  • Categories
  • Adhesive
  • Aerosols & Spray Paints
  • Coatings
  • Fashion
  • Sealants
  • Pu Foams
  • Home
  • About us
  • Products
  • Quality
  • Contact us
  • B2B