P96 Polyurethane Adhesive Foam
P96 is a one component aerosol polyurethane adhesive foam, fast moisture curing. Provides a very fast, powerful adhesive for various construction materials, especially highly recommended for heat insulation systems.
Properties
Powerful adhesion of polystyrene heat panels (XPS and EPS). Instant adhesion and wall plugging within two hours. More economical. Ready to use in aerosol can. Minimum 6 m2 heat insulation panel adhesion for each can. Minimum expansion during drying period. After dried, no further expansion and shrinkage. A lighter material compared to plaster, alternative material, used in heat insulation systems. No more extra burden or weight to building. High yield up to 55 liters, depending on the humidity and temperature. Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102 Part-1 ) Usable at low temperature like 0 °C It does not contain any propellant gases which are harmful to the ozone layer.
Applications
Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.
Description
Related products
Glossy Black – Matte Black
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.
Properties
High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).Applications
Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.
C80 Foam Cleaner
C80 removes fresh PU foam and cleans the PU foam gun adapter after the application. Cleans surfaces, clothes, window&door frames and prevents the foam cure in the gun adapter.
Properties
Powerful solvent based aerosol cleaner for removing uncured PU foam ( straw and gun adapter foam).Designed especially for cleaning the gun adapter of foam. Cleaner has a spray activator for removing the foam from the gun adapter. It can be used in all positions. Propellant gas is not harmful to the ozone layer.Applications
Cleaning of the gun adapter. Cleaning of the valves of the PU Foam Aerosol. Removal of uncured foam.
P55 Multi Purpose PU Foam
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Properties
Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.Applications
Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes
P33 Fire Rated Professional PU Gun Foam
DEMSUN P33 is a single component, moisture curing, self-expanding, ready to use polyurethane foam with propellants which are completely harmless to ozone layer. It has a fire rating of up to 235 minutes in certain configurations. High quality PU straw foam recommended for sealing applications where fire resistance is required. PU foam used with an applicator gun and features higher yield, easier application and reusability.
Properties
According to EN 1366-4 fire retardant up to 235 min. – see table enclosed. Efficient seal against smoke and gas. Does not contain CFC’s and H-CFC’s. Excellent adhesion & filling capacity. Excellent mounting capacity and stability. High yield up to 55 liters depending on temperature and humidity. Excellent adhesion on most substrates (except Teflon, PE and PP). High filling capacity. High thermal & acoustical insulation value. After cured, it can be painted, cut, trimmed. No shrinkage. Mould and water resistant. Conforms to fire class B1 (DIN 4102). Conforms to French A+ Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.Applications
All applications where fire retardant properties are required such as: Installation of door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in walls. Heat insulation of roof construction. Sealing of cable and pipe penetrations. Soundproofing and sealing partition walls. Bonding of insulation materials. Multi-Purpose, adhesion and fixation.
M18 Siliconized Flexy Acrylic Sealant
M18 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.
Properties
Its siliconized structure, makes it possible to handle movement up to 15%. Water based & Non-toxic..Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.Applications
Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.
M35 PU Sealant Constrution
M35 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
Properties
Possesses permanent elasticity No sagging – Thixotropic No surface tackiness after full cure.. Do not pick up dirt No shrinkage Enhanced storage stability Can be applied with hand gun and tooled easily Paintable Cures bubble-free 25 % movement capability Conforms to BS 6920 for the metallic water soluble impurities and is suitable for use in drinking water systemApplications
Expansion joints between many different construction materials Movement and connection joints in floors Indoor and outdoor applications for pedestrian and traffic areas Joints between prefabricated construction materials Sealing and bonding of ventilation ducts, gutters and spouts etc. For expansion joints between pre-cast concrete panels Meets the requirements of ISO 11600 F 25 LM
Glossy Yellow
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.
Properties
High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).Applications
Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.
M55 PU Windshield Adhesive
M55 Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.