HB15 Eco Hybrid Polyurea
Back to products
PA70 Polyaspartic Polyurea

PA05 Polyaspartic Polyurea

PA05 is a two component, rapid curing, UV resistant, 100% color stable new generation polyaspartic based polyurea surface coating system for both decorative and protective applications. On account of the UV and color fast properties, it is ideal for use as thin layer coating and clear topcoat sealer for surface protection on existing coating systems. After the product is completely cured, it forms a glossy, smooth top layer with high scratch, abrasion and chemical resistance. Polyaspartic system can be applied in a single or multiple coats by roll, brush or squeegee to a variety of substrates including concrete and metal.

Properties

Excellent color stability and gloss retention. Excellent UV light resistance. Long working and gel time. Fast reactivity and cure time (applicable to pedestrian traffic after 3-4 hours). Rapid
return to service (return to service in 24 hours). Easy application and spreading. Excellent adhesion to concrete and metal substrates. High abrasion, impact and corrosion resistance. Excellent chemical resistance. Resistant to chlorine and saltwater. High hydrolysis resistance. Perfect thermal stability. Available in transparent and several RAL colours.

Applications

As top layer over polyurea coatings where UV resistance and color stability is required. Clear sealer over decorative concrete surfaces. Swimming pools, terraces and garage floors. Industrial
and commercial flooring. Restaurant and hospital flooring. Water parks, amusement parks and decorative applications. Aircraft hangers. Deck coatings. Wind energy plants.

Categories: ,
Description

Technical Properties

  • Chemical structure : A: Amine Resin B: HDI Prepolymer
  • Mix ratio (by weight) : 60:40 (A:B)
  • Consumption (g/m²) : 150-200
  • Recommended thickness (μm) : 150-200
  • VOC content (%) ASTM D1259 : 0
  • Solid content (%) ASTM D2697 : 95
  • Gel time (sec) : 30-35*
  • Tack free time (sec) : 50-60*
  • Pedestrian traffic time (hr) : 3-4 *
  • Full cure time (day) : 7*
  • Min. recoat time (hr) : 2*
  • Max. recoat time (hr) : 24*
  • Tensile strength (MPa) ASTM D638 : 4-6
  • Elongation at break (%) ASTM D638 : >30
  • Hardness (Shore A) ASTM D2240 : 65-70
  • Abrasion resistance (mg) EN ISO 5470-1 : <15 (H22, 1000 cycle)

Related products

H32 High Temperature Silicone Sealant

,
H32 is a high-performance silicone sealant developed for sealing, bonding and repairing works where heat resistance is required. It is an ideal sealant for high temperature construction applications. It reacts with atmospheric moisture to produce a tough, elastic silicone.

Properties

Excellent heat resistance after curing up to 250 °C permanently and up to 300 °C temporarily. 100% silicone, Remains flexible at low (-40 °C) and high (+250 °C) temperatures, Resists to mechanical enforcement after curing, Acetoxy cure, RTV silicone, Will not crack, shrink or become brittle, One component.

Applications

Sealing and bonding applications in automotives, On heating systems and ovens for sealing / tightness, Sealing and bonding in stoves, Gaskets in pumps and motors, Sealing chimneys, Other bonding and sealing applications where parts must perform at high temperatures.

P77 Mega Professional PU Gun Foam

,
Mega Professional Pu Foam is a single-component professional pu foam which yields significantly higher volumes. It is used with a special applicator gun.

Properties

High yield up 65 litres, depending on the humidity and temperature. Excellent adhesion on common construction materials. Economical consumption thanks to precise application.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes.

M12 Fire Saver Intumescent Acrylic Sealant

,
M12 is water-borne intumescent acrylic sealant. At the temperatures above120°C, it reduces the heat transfer by expanding its volume. Also gives extra time with the cooling effect of the released water steam at this temperature.

Properties

Single-component sealant based on plasto elastic acrylic capable of swelling. Expands in volume at temperatures exceeding 120°C and reduce heat transfer. Saves time by releasing water vapor to fire, Easy to apply. Waterproof layer after drying forms a layer. Weather resistant and remains flexible for a long time. Ideal for sealing low movement joints, suitable for up to 50 mm gaps. Paintable and fill the surface of the fat-free and does not affect the surface.

Applications

Walls and floors’ expansion joints. Panel joints for insulation purposes and similar materials Wood, steel and PVC joinery for isolation. Decorative joints. Steel channels, canal boats, for the sealing of cables and cable ducts. For indoor applications that require fire resistance. In order to fill in areas where fire resistance applications. All joints in buildings that require fire resistance. Fire resistance up to 15% of the desired elasticity of joints shows.

P55 Multi Purpose PU Foam

,
P55 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.

Properties

Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

M19 Acrylic Sealant

,
M18 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.

Properties

Its siliconized structure, makes it possible to handle movement up to 15%. Water based & Non-toxic..Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.

Applications

Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.

N27 Multi Purpose Building Neutral Silicone

,
N27 is a neutral cure, silicone sealant, exclusively created for weather sealing and glazing application. It forms highly resistive weatherproof seal on windows and building facades.

Properties

Provides permanent elasticity. Not affected by exposure to sunlight, rain, snow and maintains it over many years, Exceptional resistance to temperature extremes, Very low odor and noncorrosive. Excellent flexibility and adhesion to numerous porous and non-porous Substrates for large scale construction and glazing applications. Fast curing, low modulus, high elasticity. High viscosity non slump formula.

Applications

Weather sealing and joint sealing for walls, windows and doors. Sealing and mounting the window and door frames. Sealing applications of marble, stone and other porous substrates.

P66 Professional Multi Purpose Pu Gun Foam

,
Multi-purpose Polyurethane Foam Professional is a single - component pu foam

Properties

Excellent adhesion& filling capacity and high thermal&acoustical insulation value. Economical consumption thanks to precise application. High yield up 45 litres and expansion up to 1,5 times depending on temperature and humidity. Conforms to fire class B3 according to DIN 4102–1. Mould-proof, water-proof and overpaintable.

Applications

Fixing and insulating of door and window frames. Filling and sealing of gaps, joints and cavities. Filling of penetrations in walls. Insulating electrical outlets and water pipes

M45 Constrution & Automotive PU Sealant

,
M45 is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, glass, wood and various plastic materials.

Properties

Permanently flexible Non-sag consistency - Exceptional thixotropy Non-sticky / does not pick up dirt No change in volume - No shrinkage Improved storage stability Easy to gun, can be easily smoothed Over-paintable Meets the requirements of ISO 11600 F 25 HM

Applications

Body construction of cars, containers, caravans etc. Sealing and bonding of ventilation ducts, gutters and spouts etc. Sealing of sheet metal seams For vibration reduction in all type of sheet metal assembly works Sealing against water, air, gas and dust.