• English
    • Russia
  • Newsletter
  • Contact Us
Select category
  • Select category
  • Adhesive
  • Aerosols & Spray Paints
  • All Products
  • Coatings
  • Pu Foams
  • Sealants
Menu
  • Home
  • About us
  • Products
  • Quality
  • Media
  • Contact us
Home All Products Q21 Aquarium Silicone Sealant
D20 Super Sanitary Silicone
Back to products
H32 High Temperature Silicone Sealant

Q21 Aquarium Silicone Sealant

Q21 is a non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It’s a high-quality acetic curing system based silicone sealant featuring excellent adhesion to glass and many other non-porous surfaces.

Properties

100% solventless silicone. Non-toxic to fish. Resistant to water. UV and many chemicals One component cures with atmospheric moisture. Keeps its elasticity at low and high tempratures. Rapid curing. Very good bond and physical strenght.

Applications

Construction and repair of aquariums and many glass structures. Suitable on glass/aluminum structures. Glazing on aluminum frames and shop displays. Sealing of windows and doors.

Categories: All Products, Sealants
Share:
  • Description
Description

Technical Properties

  • Basis : Silicone Polymer
  • Curing System : Acetoxy
  • Density : 1.02 ± 0.03 g/ml
  • Hardness Shore A : 24-30 (after 28 days)
  • Tensile Strength : ≤ 0,4 N/mm² (23°C and 50% R.H) (ISO 8339)
  • Skin formation : 7-13 min. (23°C and 50% R.H)
  • Curing Rate (23°C and 50% R.H) : Min. 3 mm/day
  • Elongation At Break : ≥ 250% (ASTM D 412)
  • Elastic Recovery : %100 (ISO 7389)
  • Sagging : 0 mm (ISO 7390)
  • Change in volume : < 5% (ISO 10563)
  • Temperature Resistance : -50°C to +200°C
  • Application Temperature : +5°C to +40°C

* The results were obtained by providing optimum environmental conditions.

Folders

  • pdf-file-format-symbol TDS
  • pdf-file-format-symbol MSDS
CodeVolumeColorBox 
DS02202310 mlBlack  24
DS02201310 mlTransparent  24

Related products

Glossy Blue

All Products, Aerosols & Spray Paints
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

D20 Super Sanitary Silicone

All Products, Sealants
D20 is a specially formulated for use in production and installation of shower cabins which has no solvent and shows excellent mold resistant properties. It’s a superior sealant for sealing and glazing applications featuring excellent adhesion and durability.

Properties

Conforms to ISO EN 11600-F-20LM. %100 silicone, does not contain any solvent. Cures very fast. Mold-Proof. Stays bright and clean. Outstanding resistance to mildew and fungus. Resistant to temperature extremes and aging. Does not crack or discolor. Withstands detergents, cleaning agents and chemicals. Acetoxy curing system. Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Lowemitting products” of SCAQMD rule 1168.

Applications

Glazing and bonding in shower cabinets during production. Filling joints between tiles, tub and shower cabin during installation. Filling joints between bath tubs and tiles after production. Waterproofing sinks.

N25 Mirror Silicone

All Products, Sealants
N25 High performance neutral cure silicone which is particularly designed for bonding the mirrors in all kinds and sizes without harming the mirror. A bonded mirror is safer because there is no risk of large pieces of glass falling in the event of breakage.

Properties

Highly elastic, +/-25% movement capability. Excellent primerless adhesion to numerous porous and non-porous substrates,Safer mirror construction with non-corrosive properties. Permanently elastic. Fast curing. %100 Silicone, Solvent free, very low odor. Adjustable, easy to apply. High viscosity non slump formula. One component moisture-cured. Excellent tooling properties. Resistant to temperature extremes (-60 °C to +180 °C)

Applications

Mirror walls in shops, restaurants, gymnasiums. Bonding mirrors to sound plaster,concrete, wood etc. Bonding mirrors to doors or ceramic wall tiles.

P96 Polyurethane Adhesive Foam

All Products, Pu Foams
P96 is a one component aerosol polyurethane adhesive foam, fast moisture curing. Provides a very fast, powerful adhesive for various construction materials, especially highly recommended for heat insulation systems.

Properties

Powerful adhesion of polystyrene heat panels (XPS and EPS). Instant adhesion and wall plugging within two hours. More economical. Ready to use in aerosol can. Minimum 6 m2 heat insulation panel adhesion for each can. Minimum expansion during drying period. After dried, no further expansion and shrinkage. A lighter material compared to plaster, alternative material, used in heat insulation systems. No more extra burden or weight to building. High yield up to 55 liters, depending on the humidity and temperature. Fire Class: E (According to EN 13501-1. It refers to B2 for DIN 4102 Part-1 ) Usable at low temperature like 0 °C It does not contain any propellant gases which are harmful to the ozone layer.

Applications

Best for mounting heat insulation panels and filling voids during adhesive application. Advised for wooden type construction materials adhesion to concrete, metal etc. Applications needed minimum expansion. Mounting and isolation for frames of windows and doors.

Glossy Green

All Products, Aerosols & Spray Paints
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

Glossy Red

All Products, Aerosols & Spray Paints
Dirt, rust, grease, dust and maisture be removed from surface. Areas not to be painted should be protected. Before using, shake the can for two minutes. When applying, shake the can in certain periods. Make a spraying test on an appropriate surface. Apply with a distance of 25-30cm. First, paint the surfaces from left to right, then from top to bottom. Leave the surface to dry.

Properties

High-grade nitro-combi quality. Very good coverage & quickdrying. Excellent adhession on many surfaces. Good flow, smooth surface. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Stratch, shock and impact - resistant. Quick - drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).

Applications

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles for any variety of designing applications.

M19 Acrylic Sealant

All Products, Sealants
M18 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.

Properties

Its siliconized structure, makes it possible to handle movement up to 15%. Water based & Non-toxic..Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.

Applications

Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.

C80 Foam Cleaner

All Products, Aerosols & Spray Paints
C80 removes fresh PU foam and cleans the PU foam gun adapter after the application. Cleans surfaces, clothes, window&door frames and prevents the foam cure in the gun adapter.

Properties

Powerful solvent based aerosol cleaner for removing uncured PU foam ( straw and gun adapter foam).Designed especially for cleaning the gun adapter of foam. Cleaner has a spray activator for removing the foam from the gun adapter. It can be used in all positions. Propellant gas is not harmful to the ozone layer.

Applications

Cleaning of the gun adapter. Cleaning of the valves of the PU Foam Aerosol. Removal of uncured foam.
certificates2
Certificates Of Our High Quality
  • Quick Links
    • About Us
    • Products
    • Quality Policy
    • Contact Us
    • B2B
  • Our Product Groups​
    • Pu Foams
    • Sealants
    • Adhesive
    • Aerosols & Spray Paints
    • Coatings
  • USEFUL LINKS
    • Privacy Policy
    • Returns
    • Terms & Conditions
    • Latest News

Our Social Links:

DEMSUN Company 2021 CREATED BY DEMSUN. Sample Text
  • Menu
  • Categories
  • Adhesive
  • Aerosols & Spray Paints
  • Coatings
  • Fashion
  • Sealants
  • Pu Foams
  • Home
  • About us
  • Products
  • Quality
  • Contact us
  • B2B