44 Standard Pure Polyurea
This pure polyurea system is a very fast set, 2-component, 100% solid, flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. Due to its superior physical and mechanical properties provides extremely durable coating. It has been especially designed to protect concrete, metal, wood, ceramic, geotextile and PU foam substrates. Since it does not contain any VOC or solvent, it is enviromentally friendly product. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties
Fast reactivity and fast return to service time. Seamless and joint-less coating. %100 solid, VOC free, no solvents. No catalyst. Little or no odor. Excellent thermal stability. Excellent water resistant. Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc. Excellent flexibility. Non sensitivity to temperature and humidity. Excellent chemical resistance. Excellent impact and abrasion resistance. Anticorrosive. Very good tensile and structural strength. Variable application thickness possible.Applications
General water isolation of storage tanks, pools, swimming pools, ponds, pipes, pipelines, waste water treatments, manholes and sewer linings, roof and terrace coatings. Floors; industrial floors, manufacturing facilities, warehouses, hospitals, factory, parking lots and garages. Construction of roads, bridge decks, railways and high speed railways, tunnels, airports and line striping. Marine industry and marine applications.
44A Aliphatic Polyurea
100% solids, flexible, two component, UV light stable elastomer coating material. It is a superior coating material designed specifically for industrial and commercial applications receiving
constant or intermittent exposure to ultraviolet light. It can be applied directly to most substrates and may be used as a topcoat for existing epoxy, polyurethane, or polyurea. When fully cured, produce a highly abrasion resistant, high-gloss, smooth finish. The material is applied high pressure and temperature spray machine.
Properties
UV light and 100% colour stable. Exterior surface coatings. High gloss finish. %100 solids, VOC and solvent free. Corrosion resistant. Seamless and waterproofing. Excellent adhesion force Moisture and temperature insensitive. Impact and abrasion resistant. Excellent tensile and structural resistance. Can be applied any desired thickness.Applications
Any exterior application requires colour stability. Roofs and garages. Airports and shipyards. Wind Turbines. Bridges and tunnels. Waterparks and recreation parks. Decorative applications.
45 Eco Pure Polyurea
This pure polyurea system is a very fast set, 2-component, 100% solid, flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. Due to its
superior physical and mechanical properties provides extremely durable coating. Since it does not contain any VOC or solvent, it is enviromentally friendly product. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties
Fast reactivity and fast return to service time. Seamless and joint-less coating. %100 solid, VOC free, no solvents. No catalyst. Little or no odor. Excellent thermal stability. Excellent water resistant. Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc.Excellent flexibility. Non sensitivity to temperature and humidity. Excellent chemical resistance. Excellent impact and abrasion resistance. Anticorrosive. Very good tensile and structural strength. Variable application thickness possible.Applications
General waterproofing and anticorrosion applications– tanks, pools, swimming pools, ponds, pipes, pipelines, waste water treatments, manholes and sewer linings, roof, balcony and terrace coatings. Floors– industrial floors, hospitals, factories. Construction– roads , bridge decks, airports, line striping. Marine industry– ship’s underwater part and ship’s decks protection and ship docks.Leisure industry– water parks, aquariums linings, playgrounds and decorative applications. On thermal insulation products for waterproofing (polyurethane foam, EPS, XPS etc.)
A11 Hot Melt Stick
A11 is a translucent, high viscosity and slow setting general purpose glue stick.
Properties
Designed for use on the paper, cloth and plastic related applications. Ideal for bonding wood, metal, fabric, ceramics, masonry, leather, cardboard. Appropriate when immediate bonding is required. Environmentally friendly. High green strength. Non-sticky surfaces. Odourless. Easy to use.Applications
Ideal for household repairs, DIY tasks, craft and hobby works.
A30 Acrylic Nail Free Adhesive
A30 is a water-based adhesive used for bonding numerous building materials. It is particularly suitable for DIY users due to solvent-free content and high bonding strength.
Properties
Acrylic dispersion based. Good gap-filling capacity on rough surfaces. Suitable for both indoor and outdoor applications. Weatherproof. Over paintable. Low odour. Solvent-freeApplications
Bonding materials such as wood, non-polished stones, concrete, plaster, tiles, panels, synthetic building materials etc. Mounting wooden construction elements, wood and plaster panels, plaster ornaments. Mounting decorative wooden trimmings. Repairing cracks in plaster. Quick repairs on walls and plaster. Suitable surfaces:MDF, Particleboard, Wood, Polystyrene foam, Concrete, Masonry, Tile, Ceramic, Stone, Plasterboard.
A32 Express Polyurethane Adhesive
A32 is a single component, fast curing polyurethane based adhesive. It combines high bond strength with fast curing. The water resistance property makes it exceptionally good at bonding wooden surfaces where water splash and moisture is an issue.
Properties
Fast curing, low press time. Conforms to D4 according to DIN EN 204. Transparent. Extremely high bond strength on wooden substrates. Thixotropic, non-sag, ideal for vertical joints. Low consumption, economical. Usable on slightly wet substrates. Very good resistance to chemicals. Excellent resistance to moisture and weather conditions.Non-shrinking. Low odor.Applications
It is suitable for use in construction and repair applications where a permanent strong bond is required between porous-porous and porousnonporous surfaces. Bonding wooden surfaces at bathroom, kitchens, decks etc. where there is a constant moisture and water contact risk. It can be used for bonding various kinds of construction materials such as wood, MDF, concrete, metal, polystyrene and polyurethane foam, marble, granite and ceramic etc.
A36 Super Mitre-Bond Kit
A36 an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
Properties
High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.Applications
It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required. Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates. Especially suitable for the applications where cure speed needs to be accelerated. Although DEMSUN A36 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.
A37 UPVC Mitre Bond
A37 an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
Properties
High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.Applications
It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required. Suitable for UPVC, MDF, wood, chip wood, rubber, most plastics, leather and other common substrates. Especially suitable for the applications where cure speed needs to be accelerated. Although DEMSUN A37 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.
A42 Super Glue
A42 is an extra low viscosity superfast instant glue based on cyanoacrylate adhesive. It is excellent where extremely fast cure is required and/or where penetration is required.
Properties
Immediate bond. Very high bond strength after a few seconds.Applications
Suitable for glass, rubber, metals, ceramic and many plastics.
A43 Super Glue
A43 is an extra low viscosity superfast instant glue based on cyanoacrylate adhesive. It is excellent where extremely fast cure is required and / or where penetration is required.
Properties
Immediate bond. Very high bond strength after a few seconds.Applications
Suitable for glass, rubber, metals, ceramic and many plastics.
A58 Cement Pvc Adhesive
A58 adhesive containing stabilized Tetrahydrofurane is suitable for joints, resistant to shear strain of pressure pipes (e. g. drinking water and gas pipes) with uPVC fittings, and gluing cable conduits, drain pipes etc in accordance with the recommendations of the Plastic Pipe Association.
Properties
High pressure resistance (16 bars). Water Resistant. Chemical Resistant especially to inorganic acids. Fast curing, maximum leak protection. Excellent gap-filling proprieties. Easy bonding even on large surfaces. Hot and cold water pipes (60°C). Resistant to bacteria. The products conforms to following standards; DIN 16970, BS 4346, ASTM-D 2564, NEN 7106Applications
Specifically indicated for: Bonding cement uPVC pipes and accessories in pressure systems up to 16 PN. Bonding pipes and accessories in waste systems according to the following: PVC-U plastics piping systems for soil and waste discharge (low and high temperature). ABS plastics piping systems for soil and waste discharge (low and high temperature). PVC-C plastics piping systems for soil and waste discharge (low and high temperature)
A60 PVA Wood Adhesive
Demsun A60 is a ready to use water resistant wood adhesive based on polyvinyl acetate homopolymer emulsion. It is specially formulated to conform to EN 204 (D3).